Author Topic: Values Please  (Read 372 times)

Offline curticus1

  • A New Nut
  • *
  • Posts: 32
  • I'm a llama!
Values Please
« on: January 05, 2005, 12:52:58 pm »
Cable nocap 5Mbps/512Kbps


TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
 
Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
 64240 (MSS x 44)  
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
 

mccoffee

  • Guest
Re:Values Please
« Reply #1 on: January 05, 2005, 11:49:37 pm »
try the following in cablenut



DefaultReceiveWindow 640000
DefaultSendWindow = 65536
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize 64240
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize 64240
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240


1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in Read1st link.

8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

11. Make sure you have ALL of the latest Windows Updates