Author Topic: A little help with Cablenut Please.  (Read 1791 times)

Offline huecalled?

  • A New Nut
  • *
  • Posts: 1
  • Gender: Male
  • What's Broadband?(men in their 40s playing music?)
A little help with Cablenut Please.
« on: July 14, 2008, 10:07:40 pm »
  Hello all,
  My name is Chris and I am new to the forum. Actually I am new to Cablenut as well. A friend told me that it works great on his computer so I was willing to try it out. I guess I didn't know what I was getting into. To start off with, I am connected to Alltel Axcess MobileLink via a tethered cell phone to my pc. The cell phone is a Samsung SCH-R500 (Alltel Hue). I pay $25/month for unlimited data. Not a bad price, considering that out here in the country the telephone company is a little behind the times. I mean heck, they JUST upgraded from the two tin cans on a string thing. lol. So unfortunately its either dial up or my current set up. I can't complain much, as I do see speeds around 400-500 kbps, lots better than dial up 56k.  However, Alltel advertises that they have speeds up to 1.5 Mbps, so I am trying to achieve that, to not much avail. Anyway, down to the details. I did 10 tests on Speakeasy, they averaged 467 kbps/down  61kbps/up. I am running windows XP SP 3. Although the Adjuster does not seem to have a setting for it. The oldest version of windows it has is Windows 2000. I downloaded 4.08.

Here is my TCP/IP analyzer test results:

SpeedGuide.net TCP Analyzer Results
Tested on: 07.14.2008 22:55
IP address: 98.105.xxx.xxx
 
TCP options string: 020405b40103030101010402
MSS: 1460
MTU: 1500
TCP Window: 98304 (NOT multiple of MSS)
RWIN Scaling: 1
Unscaled RWIN : 49152
Reccomended RWINs: 64240, 128480, 256960, 513920
BDP limit (200ms): 3932kbps (492KBytes/s)
BDP limit (500ms): 1573kbps (197KBytes/s)
MTU Discovery: ON
TTL: 51
Timestamps: OFF
SACKs: ON
IP ToS: 01011100 (92)
    Precedence: 010 (immediate)
    Delay: 1 (low delay)
    Throughput: 1 (low throughput)
    Reliability: 1 (low reliability)
    Cost: 0 (normal cost)
    Check bit: 0 (correct)
DiffServ: No valid DiffServ equivalent (010111)

Thank you for all the help you can provide, and I am honored to be in this forum.
  Chris

mccoffee

  • Guest
Re: A little help with Cablenut Please.
« Reply #1 on: July 15, 2008, 12:59:01 am »
give thease a shot that is an unusal setup not sure how well it work  are you getting good signal streath when you connect?


DefaultReceiveWindow = 192000
DefaultSendWindow = 98304
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
Priority Boost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshhold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceives = 0
GlobalMaxTcpWindowSize = 37960
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAttacks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetired = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 37960
MaxConnectionsPer1_0Server = 10
MaxConnectionsPerServer = 8
DefaultTimeToLive = 64
DefaultUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240